
Automotive parts and body assemblies
Brackets, seat frames and body panels are welded on coated and high-strength steel, where weld time has to stay short and the nugget still has to pass peel and chisel checks.
View application
Stud welders
Capacitor discharge stud welder
A 1.6 kJ capacitor discharge stud welder for M3–M8 fasteners on panels and enclosures. The short pulse welds the stud without burning through thin sheet, so the visible face stays clean.
Specifications describe this series. Confirm the final configuration, gun and spares list with the export desk before ordering.
Features
Stud sizes from M3 to M8 run from one power source with matched chuck and ferrule tooling.
Short discharge time limits heat marking on the reverse side of painted or coated panels.
Gun and earth cable lengths are matched to the working area so current setting stays repeatable.
Specifications
| Stored energy | 1.6 kJ |
|---|---|
| Stud diameter | M3–M8 |
| Charging voltage | 0–200 V, adjustable |
| Weld time | 1–10 ms |
| Cycle rate | 20–40 studs/min (reference) |
| Input | single-phase 220 V, 50/60 Hz |
| Gun weight | 2.4 kg (reference) |
| Power source weight | 48 kg (reference) |
Reference values for this series. Final values are confirmed on the order confirmation.
Where it is used

Brackets, seat frames and body panels are welded on coated and high-strength steel, where weld time has to stay short and the nugget still has to pass peel and chisel checks.
View application
Appliance panels, housings and shelves combine spot welds on visible surfaces with projection-welded nuts inside the part, so electrode marking and nut position both matter.
View applicationRelated equipment

MFDC spot welders
MFDC spot welder
Short weld times on coated and high-strength steel

Suspended spot welders
Suspended spot welder
Reach across large panels without moving the part