
Automotive parts and body assemblies
Brackets, seat frames and body panels are welded on coated and high-strength steel, where weld time has to stay short and the nugget still has to pass peel and chisel checks.
View application
Projection and butt welders
Long-arm projection welder
A 160 kVA press-type projection welder with an extended lower arm, built for appliance panels and brackets where the weld point sits well inside the part. Combined with a nut feeder, the operator loads the panel and the nut is placed and welded in one cycle.
Specifications describe this series. Confirm the final configuration, gun and spares list with the export desk before ordering.
Features
Extended lower arm reaches weld points inside deep-drawn panels and housings.
Force and current are programmed per nut size, so M6 and M8 studs do not need separate machines.
Interlock with an automatic nut feeder places the nut before the weld cycle starts.
Specifications
| Rated capacity | 160 kVA |
|---|---|
| Input voltage | 3-phase 380 V, 50/60 Hz |
| Secondary current | up to 25 kA (reference) |
| Electrode force | 10–30 kN, pneumatic |
| Lower arm length | 600–1000 mm by configuration |
| Duty cycle | 20% |
| Cooling | Water-cooled electrodes and transformer |
| Weight | 620 kg (reference) |
Reference values for this series. Final values are confirmed on the order confirmation.
Where it is used

Brackets, seat frames and body panels are welded on coated and high-strength steel, where weld time has to stay short and the nugget still has to pass peel and chisel checks.
View application
Appliance panels, housings and shelves combine spot welds on visible surfaces with projection-welded nuts inside the part, so electrode marking and nut position both matter.
View applicationRelated equipment

Projection and butt welders
Butt welder
Wire and rod joints with controlled upset force

MFDC spot welders
MFDC spot welder
Short weld times on coated and high-strength steel